Abracs Phoenix Flat Metal Cutting Disc 115mm x 3.0mm x 22.23mm

The Abracs Phoenix is a flat grinder disc for metal cutting, 115mm across, 3.0mm thick and with a 22.23mm bore. Part of the Phoenix II range, it is produced to oSa safety standards and gives smooth, consistent cutting, built for heavy duty use with a long life and a consistent wear rate.

Key features

• 115mm x 3.0mm x 22.23mm
• Flat metal cutting disc
• Produced to oSa safety standards
• Smooth and consistent cutting
• Heavy duty, long life, consistent wear rate

Specifications

Which one do I need?

At 3.0mm thick, this disc is the heavier duty choice next to thinner 1mm discs, so it suits tougher metal cutting where long life matters more than a very fine kerf. It needs a 115mm grinder with a 22.23mm spindle. Abracs makes a matching Phoenix disc for stone.

How to use

1. Unplug the grinder and check the disc speed rating against the grinder.
2. Fit the disc and tighten the flange nut.
3. Fit the grinder guard and wear eye protection and gloves.
4. Clamp the metal securely and let the disc reach full speed.
5. Cut with steady pressure, keeping the disc straight in the cut.

FAQs

What size is this grinder disc for metal?

It is 115mm x 3.0mm with a 22.23mm bore.

Is it made to a safety standard?

Yes, it is produced to oSa safety standards.

Is it a heavy duty disc?

Yes. Abracs describes it as heavy duty with long life and a consistent wear rate.