Securlec T1 Pendant Kit Long Skirt Lampholder 6 Inch

The Securlec T1 pendant kit is a 6 inch (15cm) lampholder with a long skirt, used to hang a bulb from a ceiling rose as a hanging light fitting. It is rated 250V, Class 2 and IP20, with a maximum of 100W incandescent or 8W LED.

Key features

• 6 inch (15cm) long skirt lampholder
• 250V, 50-60Hz, Class 2
• Max load 100W incandescent or 8W LED
• IP20
• Terminal capacity 2 x 1.0mm2 or 2 x 1.5mm2
• BS EN 60598 and BS EN 62493

Specifications

Which one do I need?

This is the long skirt version, in 6 inch (15cm). Check the skirt length and the 100W incandescent or 8W LED limit against the lamp you plan to hang.

How to use

1. Isolate the circuit at the consumer unit before you start work on the pendant kit.
2. Compare the bulb wattage you intend to fit with the limits listed for the pendant kit.
3. Make the connections to the pendant kit terminals, keeping bare wire inside the screw clamp.
4. Finish by mounting the pendant kit and testing the light after the power is back on.
5. Do not use the pendant kit if any part looks cracked or damaged.

FAQs

What is the maximum bulb wattage?

It takes up to 100W incandescent or 8W LED.

What cable sizes do the terminals take?

They accept 2 x 1.0mm2 or 2 x 1.5mm2.

Which standards does it list?

BS EN 60598 and BS EN 62493.