Draper Masonry Drill Set - 5 Piece

This Draper set gives you five masonry drill bits in the sizes most often needed for plugs and fixings around the house: 4, 5, 6, 8 and 10mm. Each masonry bit is tungsten carbide tipped and suits an impact drill or a standard power drill.

Key features

• Five sizes: 4.0, 5.0, 6.0, 8.0 and 10.0mm
• Tungsten carbide tipped cutting edges
• Works in impact or power drills
• Comes in a plastic storage case
• Manufactured to ISO 5468

Specifications

Which masonry drill size do I need?

Match the bit to the wall plug you are fitting. Smaller plugs for pictures and light shelves usually call for the 5 or 6mm bit, while heavier fixings need the 8 or 10mm. With five sizes in one case, the right one is normally to hand.

How to use

1. Mark the hole and check for hidden cables or pipes first.
2. Fit the masonry drill bit and tighten the chuck firmly.
3. Start slowly to stop the tip wandering, then use hammer action on brick or block.
4. Pull the bit out now and then to clear dust.
5. Return each bit to its slot in the case after use.

FAQs

Can I use these masonry drill bits in an impact drill?

Yes. The set is suitable for impact drills as well as power drills.

What sizes are in the set?

4.0, 5.0, 6.0, 8.0 and 10.0mm, one of each.

What standard are they made to?

The bits are manufactured to ISO 5468.