Securpak Zinc Plated PH Machine Screws M5 x 75mm 2 Pack

Securpak M5 machine screws in M5 x 75mm, zinc plated with a PH drive and sold two to a pack. These are the longest machine screws in this Securpak range, so they are the ones to reach for when you need to fix through thick parts.

Key features

• Zinc plated PH machine screws
• M5 x 75mm
• 2 pack

Specifications

Which one do I need?

M5 is the thread size, and 75mm is the length. Machine screws go into a matching threaded hole or through clearance holes with a nut, so you will need an M5 nut or an M5 tapped hole to fix into; nuts are not mentioned as part of this pack. Measure the total thickness you need to pass through and make sure there is enough thread left to engage fully.

How to use

1. Check that the receiving hole or nut is an M5 thread.
2. Line up the parts so the screw passes through squarely.
3. Start the screw by hand so it does not cross-thread.
4. Tighten with a PH screwdriver until firm, without forcing it.
5. If the screw is much longer than needed, choose a shorter size rather than leaving a long tail exposed.

FAQs

What drive do these M5 machine screws use?

They have a PH drive, so use a PH screwdriver or bit.

How many are in the pack?

Two screws.

What length are they?

75mm, the longest in this Securpak machine screw range, made for thick parts.