Rawlplug Impactor Masonry Drill Bit 6 x 100mm

Rawlplug Impactor bits are masonry hammer drill bits, and this one measures 6 x 100mm. A specially sharpened carbide plate gives quick, cylindrical holes, the deep-seated plate improves the connection with the drill core, and Rawlplug says it reduces battery power used by 20% when drilling with a hammer cordless drill.

Key features

• Size 6 x 100mm
• Sharpened carbide plate for quick, cylindrical drilling
• Deep-seated carbide plate improves the connection with the drill core
• Reduces battery power used by 20% with a hammer cordless drill
• Heat treated steel hardened to 52 HRC

Specifications

Which one do I need?

The 100mm length is the shorter of the two Impactor 6mm bits, so it is easier to control for everyday fixing holes. The 100mm length is easy to control for shallow holes in brick and block. Match the 6mm diameter to your wall plugs.

How to use

1. Check for hidden pipes and cables before drilling.
2. Seat the bit fully in the chuck and tighten it firmly.
3. Start the hole slowly to locate the tip on your mark.
4. Switch to hammer action and keep the drill straight.
5. Clear dust from the hole regularly, and wear eye protection and a dust mask.

FAQs

What size are these Impactor hammer drill bits?

This one is 6mm in diameter and 100mm long.

Does it really save battery?

Rawlplug says it reduces battery power used by 20% when drilling with a hammer cordless drill.

How tough is it?

The steel is heat treated and hardened to 52 HRC, with a deep-seated carbide plate.