Securfix Multi-Purpose Screws 5.0 x 70mm, Pack of 100

You get 100 5.0 x 70mm multi purpose screws here, with double corrosion resistance and a countersunk head. Indoors or outdoors, they are listed for chipboard, sheet metal, MDF, PVCu, hardwood, plasterboard and softwood.

Key features

• Size 5.0 x 70mm (10 x 2 3/4 inch)
• Pack of 100
• Cross/pozi drive
• Countersunk head
• Zinc and yellow passivated
• Double corrosion resistance
• Interior and exterior use
• Fully threaded up to 70mm
• Suits chipboard, sheet metal, MDF, PVCu, hardwood, plasterboard and softwood

Specifications

Which one do I need?

If the total depth of your joint is near 70mm, these will reach; if the pieces are thinner, a shorter size avoids the point breaking through the back.

How to use

1. Hold the parts together and mark the screw positions before fixing.
2. In hardwood or near board ends, pre-drill a small pilot hole first.
3. Push the bit firmly into the head and drive at a steady speed.
4. Drive until the head is flush with the face of the work and stop there.

FAQs

What is the pack quantity for the 5.0 x 70mm (10 x 2 3/4 inch) screws?

100 screws, each 5.0 x 70mm (10 x 2 3/4 inch), are supplied in the pack.

Is outdoor use covered?

The manufacturer says interior and exterior for the 5.0 x 70mm (10 x 2 3/4 inch) size, with double corrosion resistance.

Will 5.0 x 70mm multi purpose screws fix into sheet metal?

Sheet metal is in the list of suitable materials for 5.0 x 70mm (10 x 2 3/4 inch), with softwood, MDF, plasterboard and chipboard among the others.